Home » Blog » How to Install Tarkett Lvt Flooring in Dining Room?

How to Install Tarkett Lvt Flooring in Dining Room?

Published on

By Donovan Carrington

Installing Tarkett LVT flooring in a dining room requires careful preparation and precise execution. This step-by-step guide will provide a detailed overview of the installation process, ensuring a successful outcome.

Beginning with the preparation of the subfloor, it is crucial to create a clean and level surface for optimal results. Accurate measurements and careful planning of the layout are essential to minimize waste and achieve a visually pleasing aesthetic.

Acclimating the Tarkett LVT flooring is crucial to allow it to adjust to the environment. Installing the underlayment provides additional stability and cushioning.

Following these initial steps, the actual installation of the Tarkett LVT planks can commence.

Finally, attention to finishing touches and maintenance tips will ensure the longevity and beauty of the flooring. By following this comprehensive guide, homeowners can confidently install Tarkett LVT flooring in their dining room, creating a stylish and durable space for dining and entertaining.

Preparing the Subfloor for Installation

The initial step in installing Tarkett LVT flooring in the dining room involves thoroughly preparing the subfloor, ensuring a stable and level surface that will provide a solid foundation for the flooring, evoking a sense of confidence and satisfaction in the audience.

Before proceeding with the installation, it is crucial to inspect the subfloor for any signs of damage or unevenness. Any loose or damaged sections should be repaired or replaced to ensure a flat surface. This can be achieved by removing any old flooring, such as carpet or vinyl, and fixing any loose or squeaky floorboards.

Once the subfloor is in good condition, the next step is to install a moisture barrier. This is necessary to prevent any moisture from seeping through the subfloor and potentially damaging the flooring. A moisture barrier can be in the form of a plastic sheet or a specialized moisture-resistant underlayment. The barrier should be laid out in a continuous manner, with overlapping seams, and secured to the subfloor using adhesive or tape.

By adhering to these steps, the subfloor will be adequately prepared for the installation of Tarkett LVT flooring in the dining room. The repaired and level subfloor, along with the moisture barrier, will ensure a stable and long-lasting flooring solution that will enhance the overall aesthetic appeal and functionality of the space.

Measuring and Planning the Layout

To ensure a precise installation, meticulous measurement and careful planning of the layout are crucial steps when considering the installation of Tarkett LVT flooring in a dining room.

The first step in this process is choosing the right color for the flooring. It is important to consider the overall design and color scheme of the dining room in order to select a flooring color that complements the existing decor. Additionally, finding the best flooring supplier is essential to ensure the quality and durability of the LVT flooring.

See also  How to Install Metroflor Lvt Flooring in Bathroom?

Once the color has been chosen and the supplier has been selected, the next step is to measure the dining room accurately. Start by measuring the length and width of the room, taking into account any irregularities such as alcoves or bay windows. It is also important to measure the height of the baseboards and door frames, as this will impact the height of the flooring. These measurements will help determine the amount of flooring material needed for the installation.

After measuring the room, carefully plan the layout of the flooring. Consider the direction in which the planks will be laid, taking into account the natural light sources in the room and the flow of foot traffic. It may be helpful to create a floor plan or use a computer program to visualize the layout before beginning the installation.

By following these steps and taking the time to measure accurately and plan the layout, a precise and visually appealing installation of Tarkett LVT flooring can be achieved in a dining room.

Acclimating the Tarkett LVT Flooring

Acclimating the Tarkett LVT flooring involves allowing it to adjust to the environment in order to minimize the risk of expansion or contraction after installation. This step is crucial to ensure the long-term stability and durability of the flooring.

Before beginning the acclimation process, it is important to understand the benefits of Tarkett LVT flooring. Tarkett LVT flooring is known for its high-quality construction, durability, and resistance to moisture, making it an ideal choice for dining rooms where spills and high foot traffic are common.

To properly acclimate the Tarkett LVT flooring, it is essential to have the proper tools and equipment. These include a moisture meter to measure the moisture content of the subfloor and the flooring itself, as well as a thermometer to monitor the temperature of the room.

It is recommended to acclimate the flooring for a minimum of 48 hours, but it may vary depending on the specific product and manufacturer’s instructions. During this time, the flooring should be stored in the room where it will be installed, with the boxes opened and the planks or tiles spread out to allow for proper air circulation.

It is important to maintain a stable temperature and humidity level during the acclimation period to ensure the best possible results.

Installing the Underlayment

Installing the underlayment requires careful attention to detail to ensure a proper foundation for the Tarkett LVT flooring. The underlayment serves as a crucial layer between the subfloor and the flooring, providing several benefits.

Firstly, it helps to reduce noise transmission, creating a quieter and more peaceful environment. Secondly, it acts as a moisture barrier, preventing any moisture from seeping through the subfloor and potentially damaging the flooring. Additionally, the underlayment helps to provide insulation, making the room more comfortable by regulating temperature and improving energy efficiency.

See also  What Is the Best Multi-Surface Cleaner for Congoleum Lvt Flooring?

When selecting an underlayment for Tarkett LVT flooring, it is important to consider the different types available. One common type is foam underlayment, which is lightweight and easy to install. It provides excellent sound absorption and is suitable for use on concrete subfloors.

Another option is cork underlayment, which offers superior sound reduction and thermal insulation. It is eco-friendly and provides a cushioning effect underfoot. Additionally, rubber underlayment is a durable option that offers both sound reduction and moisture resistance.

To install the underlayment, start by cleaning and preparing the subfloor. Ensure it is dry, clean, and level. Roll out the underlayment, allowing it to extend up the walls slightly to create a moisture barrier. Use a utility knife to trim any excess underlayment. Install the Tarkett LVT flooring directly on top of the underlayment, following the manufacturer’s instructions.

Laying Down the Tarkett LVT Planks

The next step in the installation process involves carefully laying down the Tarkett LVT planks, ensuring a precise and seamless fit. Before starting, it is important to measure and plan the layout of the planks to achieve the desired look.

Begin by determining the starting point, usually along a straight wall, and then work your way across the room.

To ensure a proper fit, it may be necessary to cut some of the planks. Measure the length needed and mark the plank accordingly. Use a utility knife or a Tarkett recommended cutting tool to cut the plank along the marked line. Take caution to make clean and straight cuts.

Once the planks are ready, it is crucial to choose the right adhesive for the installation. Tarkett provides a range of adhesives specifically designed for LVT flooring. It is important to follow the manufacturer’s instructions and select an adhesive that is suitable for the subfloor and the specific type of LVT planks being installed.

Apply the adhesive evenly on the subfloor using a trowel, following the recommended coverage rate. Carefully lay each plank down, starting from the chosen starting point, and press firmly to ensure proper adhesion. Ensure that the planks are aligned correctly and fit tightly together.

Continue this process, working row by row, until the entire floor is covered. Take care to maintain consistent spacing between the planks for a visually appealing result.

Finishing Touches and Maintenance Tips

To complete the installation process, attention to detail in the finishing touches and consistent maintenance will ensure a long-lasting and visually pleasing result.

After laying down the Tarkett LVT planks in the dining room, it is important to implement the necessary finishing techniques to achieve a polished look. One essential step is to trim the edges of the flooring to ensure a clean and seamless appearance. This can be done using a utility knife or a specialized trim cutter, following the manufacturer’s guidelines.

Additionally, it is crucial to clean and care for the Tarkett LVT flooring regularly to maintain its pristine condition. Daily maintenance involves sweeping or vacuuming the floor to remove any dirt or debris that may cause scratches. For a deeper clean, a damp mop can be used with a mild, pH-neutral cleaner specifically designed for LVT flooring. Avoid using abrasive or harsh cleaning agents, as they can damage the finish of the floor.

See also  What Is the Best All-Purpose Cleaner for Mohawk Lvt Flooring?

Furthermore, it is recommended to place felt pads under furniture legs to prevent scratches and to use mats at entryways to minimize the amount of dirt and moisture brought onto the floor. Lastly, it is advisable to avoid dragging heavy furniture or appliances across the floor to prevent any potential damage.

By following these finishing techniques and implementing proper cleaning and care practices, the Tarkett LVT flooring in the dining room will maintain its appearance and durability for years to come.

Frequently Asked Questions

How long does it take for Tarkett LVT flooring to acclimate before installation?

Tarkett LVT flooring requires an acclimation time before installation. The recommended acclimation time is typically 24-48 hours. During this period, the flooring should be stored in the room where it will be installed, allowing it to adjust to the room’s temperature and humidity.

Can Tarkett LVT flooring be installed over existing tile or carpet?

Tarkett LVT flooring can be installed over existing tile or carpet. It offers several benefits over other flooring options, such as durability, easy maintenance, and the ability to mimic the look of hardwood.

Is it necessary to remove baseboards before installing Tarkett LVT flooring?

Removing baseboards is not necessary when installing Tarkett LVT flooring, as it can be installed directly over existing flooring. However, if desired, baseboards can be removed and reinstalled after the LVT installation. Other alternative flooring options should be considered if baseboards cannot be removed.

Can Tarkett LVT flooring be installed in a bathroom or other high-moisture areas?

Tarkett LVT flooring is suitable for high-moisture areas like bathrooms due to its water-resistant properties. Compared to other flooring types, Tarkett LVT offers benefits such as durability, easy maintenance, and a wide range of design options.

How do I clean and maintain Tarkett LVT flooring after installation?

To clean and maintain Tarkett LVT flooring, follow these effective maintenance tips. Start by sweeping or vacuuming the floor to remove dirt and debris. Then, mop the floor using a pH-neutral cleaner and a damp mop. Avoid using excessive water or harsh chemicals. Finally, dry the floor thoroughly to prevent any water damage. Regularly clean up spills and avoid dragging heavy furniture to prevent scratching.


In conclusion, installing Tarkett LVT flooring in your dining room can be a straightforward process if you follow the correct steps.

Begin by preparing the subfloor and ensuring it is clean and level.

Measure and plan the layout to determine the number of planks needed.

Allow the flooring to acclimate to the room’s temperature and humidity.

Install the underlayment to provide a smooth surface for the LVT planks.

Finally, lay down the planks, ensuring they are properly aligned and secure.

Regular maintenance, such as sweeping and mopping, will help to keep your Tarkett LVT flooring looking its best.

Previous Post

Next Post

Donovan Carrington


Donovan Carrington, a flooring expert with extensive experience of over 25 years, is the driving force behind Flooring Explorer. Initially working as a flooring installer, Donovan gained hands-on experience with different flooring materials such as hardwood, laminate, vinyl, and tile. His profound knowledge and expertise in flooring technologies and installation techniques have established him as a respected authority in the industry.